Config Guide

319
Figure 5-128
Check the box to enable POS function, Click Set button; you can see the following interface. See Figure
5-129.
Figure 5-129
Set source IP and destination IP, and then click OK. System goes back to Figure 5-128.
 Source IP: POS device IP address.
 Destination IP: NVR IP address.
In Figure 5-128, click Channel Set button, select the channel you want to overlay POS information. Click
OK button to complete the setup.
Tips
: Click it to delete POS setup.
: Click it to change setup information.
5.11.5.6 Voice
The audio function is to manage audio files and set schedule play function. It is to realize audio broadcast
activation function.