Config Guide

304
Figure 5-107
Figure 5-108
Please refer to the following sheet for detailed information.
Parameter Function
Channel Please select a channel from the dropdown list.
Pre-record Please input pre-record time here. The value ranges from 0 to 30.
Redundancy
Check the box here to enable redundancy function. Please note this
function is null if there is only one HDD.
Snapshot Check the box here to enable snapshot function.
Holiday Check the box here to enable holiday function.
Setup
Click the Setup button, you can set record period. See Figure 5-107.
There are six periods in one day. If you do not check the date at the