User's Manual

Name
Function
TCP port
TCP port value. Default setup is 37777. Input the actual port number if
necessary.
Note
Set TCP port value when manufacturer protocol is private.
RTSP port
RTSP port value. Default setup is 554. Input the actual port number if
necessary.
Note
Do not need to set RTSP port value when manufacturer protocol is private
or customized.
HTTP port
Set the HTTP port value of the remote device. The default setup is 80.
Note
Do not need to set HTTP port value when manufacturer protocol is private
or customized.
User
name/password
The user name and password to login the remote device.
Channel amount
Input channel amount or click Connect to get the remote device channel
amount.
Note
Recommend you click the Connect button to get the remote device
channel amount. If the input channel amount is not right, system cannot
add remote device.
Remote channel
number.
After getting remote device channel amount, click Set to select a channel
to connect.
Channel
The channel to connect to the remote device.
Service type
Set the service type of the remote device.
Note
 The supported service type may vary if the device manufacturers are
not the same. Refer to the actual interface for detailed information.
 The default connection mode is TCP if the remote device is using the
private protocol.
3. Click OK to add.
 Batch Add
1. Click the on the manual search pane, select batch add.
Enter add interface. See Figure 2-17.
22