User's Manual

Thanks you for using our product
Features
General power consumption statistics.
Smart on/off.
Quick Setup
You can use this series product to control the
device on/off status remotely, track device running
st atu s, colle ct powe r con sum pti on st ati sti cs,
schedule boot up and shut down the device.
Please follow the steps listed below to pair the wireless
remote control outlet and the LeBox up.
Step 1
Open the software management interface and then
select Add device button.
Step 2
Please read the quick star t guide carefully before
you use this series product!!
Press it manually to turn on/off the device power.
Press it for a long time (About 6 seconds) to pair.
Power button
Indicator light
The blue light is flashing quickly when it is in pair
mode.The blue light is on if the connection is OK.
The yellow light is on if the pair is OK but here is
no network.
Socket
Insert the power socket.
Fuse cover
Open it to replace fuse.
This quick start guide is for (including but not limited to)
RC1 and DH-CE-Z100 series product.
Pin
Fuse Cover
Socket
Indicator Light
Power Button
Power consumption statistics
Remote boot up and shut down
Schedule boot up and shut down
Countdown boot up and shut down
On the client, it can collect the device power consumptions
connected to the outlet.
On the client, you can boot up or shut down the device
remotely.
On the client, you can set boot up and shut down time.
On the client, you can set device boo up and shot down
countdown time.
Functions
Press the Pair button for about 6 seconds; you can go
to the pair mode. Now you can see the blue indicator
light becomes flashing quickly. The light becomes on
after the pair process is successful. You can view the
pair is successful on the LeBox and the device is
added to the wireless remote control outlet category.