User's Manual
79
Configuring UPnP
1. Select Setting > Network > UPnP.
Figure 5-41 UPnP
2. Select Enable.
3. Select a mode from the drop-down list.
There are 2 mapping modes: Custom and Default.
● In Custom mode, users can modify the external port.
● Select Default, and then the system finishes mapping with unoccupied port automatically. In
this case, you do not need to modify mapping relation.
4. Select Start Device Discover.
5. Click Save.
5.2.7 Bonjour
Introduction
Bonjour is also called zero-configuration networking, which can automatically discover computers,
devices and services on IP networks. Bonjour is a protocol of industry standard which allows devices
to search and find each other. IP address or DNS server is not required during the process.
Enable this function, and the network camera will be automatically detected by the OS and client with
Bonjour function. When the network camera is automatically detected by Bonjour, server name you
have set will be displayed.