User's Manual

78
Type
SMTP Server
Authentication
Port
Description
—
mailbox.
● The authentication
code is required; the
email password is not
applicable.
Authentication code is
the code you receive
when enabling SMTP
service.
Sina
smtp.sina.com
SSL
465
You need to enable SMTP
service in your mailbox.
—
25
126
smtp.126.com
—
25
You need to enable SMTP
service in your mailbox.
Step 3 Click Save.
5.2.6 UPnP
After UPnP is enabled, Intranet service and port of the Device will be mapped to Extranet. Think twice
before enabling it.
UPnP (Universal Plug and Play) allows you to establish the mapping relationship between Intranet
and Extranet. Extranet users can access Intranet device by visiting Extranet IP address. Intranet port is
device port and Extranet port is router port. Users can access the Device by accessing Extranet port.
When you are not using routers for UPnP, disable UPnP to avoid affecting other functions.
Once UPnP is enabled, the Device supports UPnP protocol. In Windows XP or Windows Vista, after
UPnP is enabled, the Device can be automatically searched by Windows network.
Adding UPnP Network Service in Windows System
1. Open Control Panel, and then select Add or Remove Programs.
2. Click Add/Remove Windows Components.
3. Select Network Service from the Windows Components Wizard and click Details button.
4. Select Internet Gateway Device Discovery and Control Client, and UPnP User Interface, and
then click OK to start installation.