User's Manual

68
Figure 5-35 TCP/IP settings
Step 2 Set TCP/IP parameters.
Table 5-12 Description of TCP/IP parameter
Parameter
Description
Host Name
Set the name of the current device. The host name can be English or
Chinese within 63 bytes.
Ethernet Card
Select the Ethernet card to be configured. Wire is selected by
default.
If the Device is configured with multiple Ethernet cards, the default
Ethernet card can be changed. If you reset the default Ethernet
card, restart the Device.
Set as Default Card
Click to set the current Ethernet card as the default card.
Mode
Static and DHCP modes are available.
If DHCP is selected, the IP address is obtained automatically. In
this case, the IP address, subnet mask, and gateway cannot be
set.
If Static is selected, you need to set the IP address, subnet
mask, and gateway manually.
MAC Address
Display the MAC address of the Device.