User's Manual

62
Step 4 Click Save.
The exception information is displayed on the image.
5.1.2.3.10 Latitude and Longitude
You can enable this function if you need to display latitude and longitude on the video image.
Step 1 Select Setting > Camera > Video > Overlay > Latitude and Longitude.
Figure 5-29 Latitude and longitude
Step 2 Select the Enable checkbox.
Step 3 Drag the box to the position that you want on the image.
Step 4 Click Save.
5.1.2.4 ROI
You can set a key monitoring region as a ROI (region of interest), and configure the image quality of
this region.
ROI is available on select models.
Step 1 Select Setting > Camera > Video > ROI.