User's Manual

5.1.2.3.4 OSD Info

You can enable this function if you want to display preset title, temperature, PTZ life warning,

coordinates, zoom, north direction, pattern, RS-485, battery information, and other information on

the video image.

Step 1 Select Setting > Camera > Video > Overlay > OSD Info.

Figure 5-23 OSD info

Step 2 Configure OSD information.

Table 5-10 Description of OSD information

Parameter

Description

Preset

Select Enable, and the preset name is displayed on the image when the

camera turns to the preset, and it will disappear 3 s later.

For some devices, you can set the duration of the preset title displaying on

the screen. You can select from Disable, 5s, 15s, Display Permanently,

and Custom.

Temperature

Select Enable, and the internal temperature of the current device is

displayed.

PTZ Life Warning

When the PTZ lifespan is close to the threshold, a warning will be

displayed on the video image. This OSD info is enabled by default.

Coordinates

Select Enable, and the PTZ coordinates information is displayed on the

image.

Zoom

Select Enable, and the zoom information is displayed on the image. For

example, means 12x zoom rate.

North

Select Enable, and the north direction is displayed on the image.

Pattern

Select Enable, and the pattern information is displayed on the image.