User's Manual

53
6:00 to 18:00, and set the night-time configuration from 18:00 to 6:00 on the next day.
Figure 5-17 Profile management—schedule
Step 3 Click Save.
5.1.2 Video
You can set the video stream, snapshot stream, video overlay, ROI, and storage path of the Device.
5.1.2.1 Video Stream
This section describes how to set the video stream for the monitoring screen.
Step 1 Select Setting > Camera > Video > Video.
Figure 5-18 Video stream settings
● The stream configuration interfaces might vary depending on devices, and the actual
interface shall prevail.
● The default bit rate of different devices might vary, and the actual product shall prevail.
Step 2 Configure video stream parameter.
Table 5-8 Description of video stream parameters
Parameter
Description
Enable
You can select the checkbox to enable sub stream. The sub stream is enabled
by default.
Encode Mode
You can select H.264, H.264H, H.264B, H.265, MJPEG, MPEG4, or SVAC.