User's Manual

52
Table 5-7 Description of defog parameter
Parameter
Description
Mode
Select the defog mode of the Device. You can select Auto, Manual, or Off. It is
Off by default.
For the Device that supports optical defog, in Auto mode, optical defog and
electronic defog switch automatically according to the algorithm. And in Off
mode, electronic defog is enabled by default.
Intensity
Set the defog intensity of the Device. You can select from Low, Medium, or
High.
Defog
Enhancement
In Manual mode, if you enable this function, both optical defog and electronic
defog are enabled. (You need to enable Auto mode for Day & Night to use the
function.)
Only the Device that supports optical defog has this parameter.
Step 3 Click Save.
5.1.1.2 Profile Management
Step 1 Select Setting > Camera > Conditions > Profile Management.
Step 2 Select the profile management mode.
There are three options: General, Full Time and Schedule.
● If you select General, monitoring is based on the general configuration of the Device.
Figure 5-15 Profile management—general
● If you select Full Time, Day and Night are selectable, and the corresponding camera
property profile is day or night.
Figure 5-16 Profile management—full time
● If you select Schedule, you can select one period for day configuration and another
period for night configuration. For example, you can set the day-time configuration from