User's Manual

50
Laser Light
Laser light makes compensation for the ambient environment when it is used for long-distance
monitoring.
Step 1 Select Setting > Camera > Conditions > Conditions > IR Light.
Figure 5-12 Laser light settings
Step 2 Configure laser light setting parameter.
Table 5-6 Description of laser light setting parameter
Parameter
Description
Mode
Select the laser light mode from ZoomPrio and Manual. It is ZoomPrio by
default.
● ZoomPrio: The Device can automatically adjust laser light brightness
according to the zoom times.
● Manual: Manually set laser light brightness and angle value.
Laser Intensity
Set the intensity of the laser light. The value ranges from 0 to 100.
Laser Angle
Set the angle value from 0 to 100.
Step 3 Click Save.
5.1.1.1.8 Defog
The defog function cannot be configured if backlight function is enabled. There will be a prompt on
the interface.
Image quality drops if the Device is installed in foggy or hazy environment. You can enable defog to
improve image quality.
Step 1 Select Setting > Camera > Conditions > Conditions > Defog.