User's Manual

47
Parameter
Description
Lens Initialization
Click this button, and the lens will be initialized automatically. The lens
will be extended to calibrate the zoom and focus.
Step 3 Click Save.
5.1.1.1.7 Illuminator
This configuration is available only when the device is equipped with illuminators. Common
illuminators are classified into IR lights, white lights, laser lights, and full-spectrum lights. Different
device models support different types of illuminators.
This section is for reference only, and might differ from the actual interface.
IR Light/White Light
These are the conditions for using IR light and white light.
● When the day & night mode is set to B/W, the monitoring screen is black and white. In this case, IR
light is used.
● When the day & night mode is set to Color, the monitoring screen is colored. In this case, white
light is used.
● When the day & night mode is set to Auto, the monitoring screen color changes with the ambient
light condition, and the illuminator varies with the monitoring screen. In B/W mode, the IR light is
turned on; in Color mode, the white light is turned on.
● Full-spectrum IR light supports the infrared IR light and white-light IR light at the same time.
Some models are equipped with photoresistor that can turn on different types of illuminators based
on the ambient brightness.
Step 1 Select Setting > Camera > Conditions > Conditions > Illuminator.
Figure 5-11 Illuminator settings