User's Manual

20
Parameter
Description
Pattern
Select Pattern from the list, enter a pattern number, and then click Start. The
PTZ starts to pattern.
Assistant
Reserved for special requirements.
If necessary, enable this function under the guidance of professionals.
Pan
Select Pan from the list, and then click Start. The PTZ starts to pan.
Go to
● Select Go to from the list, enter horizontal angle value, vertical angle value
and zoom, and then click Go to. The Device will turn to the position you
want.
● One unit of the horizontal angle value or vertical angle value you enter
equals 0.1 degree.
Menu
Figure 2-20 Menu page
Table 2-8 Description of menu parameter
Parameter
Description
Direction Buttons
Click the up and down buttons to select parameters, and click the left
and right buttons to select parameter values.
OK
Confirmation button.
Open
Open the OSD menu.
Close
Close the OSD menu.
Click Open to open the OSD menu. The OSD menu is displayed on the live view.