User's Manual

18
2.5 PTZ Configuration
You can control PTZ by using the PTZ Control panel or joystick. You can also set preset, scanning,
and other functions in the PTZ Function area.
PTZ Control
Before using the PTZ Control panel, you need to set the PTZ protocol by selecting Setting > PTZ >
Protocol.
Figure 2-17 PTZ control
Table 2-6 Description of PTZ control parameter
No.
Parameter
Description
1
Direction Buttons
There are 8 directions: Up, down, left, right, upper left,
upper right, lower left, and lower right.
2
Position
Provides quick positioning function. Draw a box in the live
view with the mouse, and then the PTZ rotates to and
focuses on the selected area rapidly.
3
Speed
The changing speed of PTZ direction. The higher the
value, the faster the speed.
4
Zoom/Focus/Iris
Click to increase the value, and click to
decrease the value.