User's Manual
177
● If HTTPS is enabled, you cannot access the Device through HTTP. The system will switch
to HTTPS if you access the Device through HTTP.
● The deletion of created and installed certificates cannot be restored. Think twice before
deleting them.
5.7.3.4 Firewall
Set a firewall for the Device to prevent network attacks after the Device is connected to the network.
Step 1 Select Setting > System > Safety > Firewall.
Figure 5-169 Firewall
Step 2 Select the type of network attack that the firewall resists. You can select Network Access,
PING Prohibited, or Prevent Semijoin.
Step 3 Select Enable to enable Firewall function.
Step 4 Click Save.
5.7.4 Peripheral
The peripheral functions might vary with different models.
Step 1 Select Setting > System > Peripheral > Wiper.
Figure 5-170 Wiper settings
Step 2 Configure wiper parameters.