User's Manual

169
Figure 5-156 System service
Step 2 Configure system service parameters.
Table 5-53 Description of system service parameter
Function
Description
SSH
You can enable SSH authentication to perform safety management.
The function is disabled by default.
It is recommended to disable SSH. If this function is enabled, there
might be security risks.
Multicast/Broadcast
Search
Enable this function, and when multiple users are viewing the
monitoring screen simultaneously through network, they can find the
Device through multicast/broadcast protocol.
It is recommended to disable the multicast/broadcast search function.
If this function is enabled, there might be security risks.
Password Reset
You can enable Password Reset to perform security management. The
function is enabled by default.
If the function is disabled, you can only reset the password after
restoring the Device to factory defaults through pressing the Reset
button on the device.
CGI Service
You can access the Device through this protocol. The function is
enabled by default.
It is recommended to disable the function. If this function is enabled,
there might be security risks.