User's Manual

167
● Any user in the Admin group has User authority to modify group authority. The User group does
not have this authority.
● The functions of the device correspond to the authority control respectively. Only user with
specified authority can use corresponding function; the Admin group has all the authorities.
Adding Groups
For specific operations, refer to "5.7.2.1.1 Username".
Modifying Groups
For specific operations, refer to "5.7.2.1.1 Username".
Deleting Groups
For specific operations, refer to "5.7.2.1.1 Username".
5.7.2.2 ONVIF User
On the web page, you can add ONVIF users, or modify existing users.
Procedure
Step 1 Select Setting > System > Account > Onvif User.
Figure 5-153 Onvif user
Step 2 Click Add User.
Figure 5-154 Add users
Step 3 Set the username and password, confirm password, and then select the group name.
Step 4 Click Save.
Related Operations
● Click to modify user information.