User's Manual

160
5.7.1.2 Date & Time
Step 1 Select Setting > System > General > Date&Time.
Figure 5-146 Date & time
Step 2 Configure date &time parameters.
Table 5-51 Description of date & time parameter
Parameter
Description
Date Format
Select the date format. Three formats are available: YYYY-MM-DD,
MM-DD-YYYY and DD-MM-YYYY.
Time Format
Select the time format. Two formats are available: 24-Hour and 12-
Hour.
Time Zone
Set the local time zone.
Current Time
The current time of the Device.
DST
Set the Start Time and End Time of DST in the Date format or Week
format.
NTP
Select the NTP checkbox to enable the network time sync function.
Server
Set the address of the time server.
Set the network timing function of NTP server, and the Device time will
be synchronized with the server time.
Port
Set the port number of the time server.
Interval
Set the synchronization interval of the Device and the time server.