User's Manual

159
Parameter
Description
Disk Full
You can select Stop or Overwrite.
● Stop: The system stops recording when the disk is full.
● Overwrite: The system overwrites the oldest files and keeps
recording when the disk is full.
The data will be overwritten if the disk is full. Back up the file in time
as needed.
Record Mode
You can select Auto, Manual or Off. Select Manual mode to start
recording immediately, and select Auto mode to record within the
schedule.
Record Stream
Select Main Stream or Sub Stream.
Step 3 Click Save.
5.7 System Management
5.7.1 Device Settings
5.7.1.1 General
Step 1 Select Setting > System > General > General.
Figure 5-145 General settings
Step 2 Configure general setting parameters.
Table 5-50 Description of general setting parameter
Parameter
Description
Name
Set the device name.
Different devices have different names.
Language
Select the language to be displayed.
Video Standard
Select video standard from PAL and NTSC.
Step 3 Click Save.