User's Manual

157
Dual SD cards are supported by some devices. For such devices, the SD card first inserted is called
Local Disk 1, and the SD card inserted later is called Local Disk 2.
● If no recordings in both cards, the recording will be saved to Local Disk 1, and then saved to Local
Disk 2 when Disk 1 is full.
● If there are recordings in both cards, the recording will be saved to the card with the latest
recordings, and then saved to the other card when this card is full.
Step 1 Select Setting > Storage > Destination > Local.
Figure 5-142 Local storage
Step 2 Select the SD card to be set, and then perform the following operations as needed.
● Click Read Only to set the SD card to be read only.
● Click Read & Write to set the SD card to be read and write.
● Click Hot Swap to remove or insert the SD card when the Camera is running.
● Click Format to format the SD card.
After formatting the SD card, all data on it will be cleared. Be cautious.
5.6.3.4 NAS
This function can be enabled only when NAS is selected as a destination path. Select NAS to store
files on the NAS server.
Step 1 Select Setting > Storage > Destination > NAS.
Figure 5-143 NAS settings
Step 2 Configure NAS setting parameters.