User's Manual

155
5.6.3 Destination
5.6.3.1 Path
Configure the storage path of recordings and snapshots of the Device, and select local SD card, FTP
and NAS for storage. Store recordings and snapshots according to the event type, respectively
corresponding to General, Motion and Alarm in the schedule, and then select the corresponding type
of recordings or snapshots for storage.
Step 1 Select Setting > Storage > Destination > Path.
Figure 5-140 Path settings
Step 2 Select the corresponding event type and storage method.
Table 5-46 Description of path parameter
Parameter
Description
Event Type
Select Scheduled, Motion Detection or Alarm.
Local
Save recordings or snapshots to the SD card.
FTP
Save recordings or snapshots to the FTP server.
NAS
Save recordings or snapshots to the NAS server.
Step 3 Click Save.
5.6.3.2 FTP
FTP function can be enabled only when it is selected as a destination path. When the network is
disconnected or does not work, you can save recordings and snapshots to the SD card by using
Emergency (Local) function.
Step 1 Select Setting > Storage > Destination > FTP.