User's Manual

141
Figure 5-118 Heat map
Step 2 Select the presets to be configured.
Step 3 Select the Enable checkbox to enable heat map function.
Step 4 Click Setting to set the arming period. For details, see "5.5.1.1 Motion Detection".
Step 5 Click Save.
5.5.9.2 Report
You can view the heat map report for the scene in the selected period.
Step 1 Select Setting > Event > Heat Map > Report.
Step 2 Set the start time and end time to search for the heat map report.
Step 3 Select a preset.
Step 4 Click Search, and the search results will be displayed on the page.