User's Manual

139
Figure 5-116 People counting settings
Step 2 Select the presets to be configured.
Step 3 Click Draw Rule, and you can draw rules on the monitoring screen. For parameter
description, see Table 5-29.
Click Clear to the right of Draw Rule, and you can clear all drawn rules.
Step 4 Configure people counting parameter.
Table 5-40 Description of people counting parameter
Parameter
Description
OSD
Display the number of people displayed in the area in real time. Click
Clear, and the current number will be zero.
Enter No.
Set the Enter No., and when the number of people entering reaches
the set value, an alarm will be triggered.
Leave No.
Set the Leave No., and when the number of people leaving reaches
the set value, an alarm will be triggered.
Stranded No.
Set the Stranded No., and when the number of people staying
reaches the set value, an alarm will be triggered.
For other parameters, see "5.5.5.1 Tripwire".
Step 5 Click Save.