User's Manual

130
Parameter
Description
Send Email
Select Send Email, and when alarms are triggered, the system sends
email to the specified mailbox. For the email settings, see "5.2.5 SMTP
(Email)".
Snapshot
Select Snapshot, and the system takes snapshot when alarms are
triggered.
● Enable the motion detection snapshot first. For details, see "5.6.1.1
Record".
● For searching and setting snapshot storage path, see "5.1.2.5 Path".
Snap Face Image
Set the snapshot scope, including Face and One-inch photo.
Attribute
Select the Attribute checkbox, click , and then you can set the
human attributes during face detection.
Step 4 Click Save.
5.5.7.2 Face Database Config
After you successfully configure the face database, the detected faces can be compared with the
information in the face database. Configuring a face database includes creating a face database,
adding face images, and face modeling.
5.5.7.2.1 Adding Face Database
Create a face database, and then register face images to add face images to the newly created face
database.
Step 1 Select Setting > Event > Face Recognition > Face Database Config.
Figure 5-102 Face database config
Step 2 Click Add Face Database.
Figure 5-103 Add face database
Step 3 Set face database name.
Step 4 Click OK to complete the addition.