User's Manual

129
● Select Setting > Event > Smart Plan to enable face recognition.
● This function is available on select models.
5.5.7.1 Face Detection
When human face is detected in the monitoring screen, an alarm is triggered and the linked action is
performed.
Step 1 Select Setting > Event > Face Recognition > Face Detection.
Figure 5-101 Face detection page
Step 2 Select Enable to enable the face detection function.
Step 3 Configure face detection parameters.
Table 5-36 Description of face detection parameter
Parameter
Description
Period
Alarm event will be triggered only within the defined period. For details,
see "5.5.1.1 Motion Detection".
Face Enhancement
Select Face Enhancement to preferably guarantee clear faces with low
stream.
Record
Select Record, and the system records video when alarms are triggered.
To enable video recording, you need to make sure that:
● The motion detection recording is enabled. For details, see "5.6.1.1
Record".
● The auto recording is enabled. For details, see "5.6.4 Record Control".
Record Delay
The video recording will not stop until the record delay time you set has
passed.