User's Manual

124
For other parameters, see "5.5.5.1 Tripwire".
Step 4 Click Save.
5.5.6 Construction Monitoring
The Device can be used for construction monitoring which include helmet detection, workwear
detection, lone working detection and absence detection.
Prerequisites
Select Setting > Event > Smart Plan to enable Construction Monitoring.
Procedure
Step 1 Select Setting > Event > Construction Monitoring.
Step 2 Select Global or a preset from the Preset list.
● If global plan is selected, detection area and rule are set by default, and the detection
area cannot be changed.
● If a preset is selected, you need to set detection area and rule manually. The following
section uses selecting Preset 1 as an example.
Figure 5-95 Global plan