User's Manual

121
reserved at the periphery of the area line.
Applicable scenes: Scenes with sparse targets and no occlusion between targets, such as perimeter
protection of unattended areas.
Step 1 Select Intrusion from the Rule Type list.
Figure 5-92 Intrusion settings
Step 2 Click Draw Rule, and you can draw rules on the monitoring screen.
For parameter description, see Table 5-29.
Click Clear to the right of Draw Rule to clear all drawn rules.
Step 3 Configure intrusion parameter.
Table 5-31 Description of intrusion parameter
Parameter
Description
Action
Configure intrusion action, and you can select Appear or Cross.
Direction
Select the crossing direction from Enters, Exits, and Enter & Exit.
For other parameters, see "5.5.5.1 Tripwire".
Step 4 Click Save.
5.5.5.3 Abandoned Object
An alarm will be triggered when the selected target in the monitoring scene stays in the screen for
more than the defined time.