User's Manual

118
Rule Config
1. Select Setting > Event > IVS > Rule Config.
Figure 5-90 Add smart rules
2. Select the presets to be configured with smart rules.
3. Click to add smart rules.
Double-click rule type to modify the type of rules.
4. Click Save.
5.5.5.1 Tripwire
Alarms are triggered when the target crosses the warning line in the defined direction. It requires
certain stay time and moving space for the target to be confirmed, so you need to leave some space
at both sides of the warning line during configuration and do not draw it near obstacles.
Applicable scenes: Scenes with sparse targets and no occlusion between targets, such as perimeter
protection of unattended areas.
Procedure
Step 1 Select Tripwire from the Rule Type list.