User's Manual

116
For other parameters, see "5.5.1.1 Motion Detection".
Step 3 Click Save.
5.5.4 Smart Plan
Smart plans include IVS, face recognition, heat map, people counting, video metadata, construction
monitoring and so on. Only after smart plans have been enabled, can the corresponding smart
function come into effect.
Before configuring the smart plan, you need to set presets in advance. For setting methods, see
"5.4.2.1 Preset".
Step 1 Select Setting > Event > Smart Plan.
Figure 5-88 Smart plan (1)
Step 2 (Optional) Click to enable Auto Tracking.
When enabling auto tracking, you do not need to configure smart plans, and the Device
performs auto tracking based on internal mechanism. If auto tracking and alarm track of the
smart plan (such as IVS) are both enabled, the Device perform tracking in the order of
triggering time.
It is recommended to disable auto tracking when alarm track is enabled to avoid disordered
tracking.
Step 3 Click to select the presets to be configured.
Step 4 Select smart plans.
The selected function will be highlighted. Click it again to cancel the selection.