User's Manual

114
● The function depends on the result of motion detection, and all other parameters (except
sensitivity) of motion detection function are used, including arming period, area settings, and
linkage configurations. If no motion detection is triggered, smart motion detection will not be
triggered.
● If motion detection is not enabled, when smart motion detection is enabled, motion detection will
also be enabled. If both functions are enabled, when motion detection is disabled, smart motion
detection will also be disabled.
● When smart motion detection is triggered and recording is linked, back-end devices can filter
recording with human or vehicles through smart search function. For details, see the
corresponding user’s manual.
Prerequisites
● Select Setting > Event > Video Detection > Motion Detection, and then enable the motion
detection function.
● Set the arming period and detection area. The sensitivity of each region is larger than 0, and the
threshold is not equal to 100.
Procedure
1. Select Setting > Event > Smart Motion Detection.
Figure 5-86 Smart motion detection
2. Select the Enable checkbox to enable Smart Motion Detection.
3. Select the effective object and sensitivity.
● Effective object: Select Human or Motor Vehicle. When Human is selected, both people and
non-motor vehicles will be detected.
● Sensitivity: Select High, Medium, or Low. The higher the sensitivity, the easier the alarm is
triggered.
4. Click Save.
5.5.3 Audio Detection
Step 1 Select Setting > Event > Audio Detection > Audio Detection.