User's Manual
110
Figure 5-82 Arming period settings
2. Set the alarm period to enable alarm events in the period you set.
◇
There are 6 time periods for each day. Select the check box for the time period to
enable it.
◇
Select the day of week (Sunday is selected by default; If All is selected, the
setting is applied to the whole week. You can also select the check box next to
the day to set it separately).
3. After completing the settings, click Save.
You will return to the Motion Detection page.
● Set the area.
Click Setting, and the Area page is displayed. Refer to Table 5-26 and Table 5-27 for
parameters description. Each color represents a certain region, and you can set different
motion detection regions for each area. The detection region can be irregular and
discontinuous.