User's Manual

105
Figure 5-76 PowerUp settings
Step 2 Select the Enable checkbox to enable power up motion.
Step 3 Select power up motion from Preset, Tour, Scan, Pattern or Auto.
Select Auto and the last motion before you shut down the Device last time will be
performed.
Step 4 Select the action number of the selected motion.
Step 5 Click Save.
5.4.2.9 PTZ Limit
After you set the PTZ limit, the Device can only move in the defined area.
Step 1 Select Setting > PTZ > Function > PTZ Limit.
Figure 5-77 PTZ limit settings