User's Manual

103
Step 2 Drag the slider to set the Pan Speed.
Step 3 Click Start, and the Device starts to rotate horizontally at this speed.
5.4.2.6 PTZ Speed
You can adjust the manual control speed of the PTZ by setting PTZ speed. This speed does not apply
to tour, pattern, or auto tracking.
Step 1 Select Setting > PTZ > Function > PTZ Speed.
Figure 5-74 PTZ speed settings
Step 2 Select Low, Middle or High.
5.4.2.7 Idle Motion
Idle motion refers to a set motion when the Device does not receive any valid command within a
certain period.
Set Preset, Tour, Scan or Pattern in advance.
Step 1 Select Setting > PTZ > Function > Idle Motion.