User's Manual

101
limits.
Step 1 Select Setting > PTZ > Function > Scan.
Figure 5-71 Scan settings
Step 2 Select the Scan No..
Step 3 Drag the slider to adjust the scan speed.
Step 4 Click Setup to adjust the Device to an ideal position.
Step 5 Click Set Left Limit and Set Right Limit to set the left and right boundaries of the Device.
Step 6 Click Start, and then the Device starts scanning.
Step 7 Click Stop, and then the scanning stops.
5.4.2.4 Pattern
Pattern means a record of a series of operations that users make to the Device. The operations
include horizontal and vertical movements, zoom and preset calling. Record and save the operations,
and then you can call the pattern path directly.
Step 1 Select Setting > PTZ > Function > Pattern.