User's Manual

1
1 Network Configuration
1.1 Network Connection
To view the web page on your PC, connect the Device to the PC first. There are mainly two connection
modes between the Device and PC.
The models presented in the figures are for reference only, and the actual product shall prevail.
Figure 1-1 Direct connection by using a network cable
Figure 1-2 Connection by using a switch or router
All devices have the same IP address (192.168.1.108 by default) when they are delivered out of
factory. To make the Device get access to network smoothly, plan available IP segment reasonably
according to practical network environment.
1.2 Log in to the Web Page
1.2.1 Device Initialization
For first-time use or after you have restored the Device to defaults, you need to initialize the Device
by performing the following steps.
Step 1 Open the browser, enter the IP address of the Device in the address bar, and then press the
Enter key.