User's Manual

94
5.2.15.3 RTMP
You can connect the third party platforms (such as YouTube) to play live video through RTMP
protocol.
● Only admin user can configure RTMP.
● RTMP only supports H.264, H.264B and H.264H video formats, and Advanced Audio Coding (AAC)
audio format.
Step 1 Select Setting > Network > Access Platform > RTMP.
Figure 5-61 RTMP page
Step 2 Select the Enable checkbox to enable RTMP.
When enabling RTMP, make sure that the address can be trusted.
Step 3 Set RTMP parameters.
Table 5-24 Description of RTMP parameter configuration
Parameter
Description
Stream Type
Select live video stream type. Make sure that the video format of the
stream is H.264, H.264B or H.264H, and the audio format is AAC.
Address Type
There are two options: Non-custom and Custom.
● Non-custom: You need to fill in the IP address or domain name.
● Custom: You need to fill in the address allocated by the server.
IP Address
If you have selected Non-custom, IP address and port need to be filled in.
● IP Address: IPv4 or domain name is supported.
● Port: It is recommended to use the default value.
Port
Custom Address
If you have selected Custom, the address allocated by the server needs to
be filled in.
Step 4 Click Save.