User's Manual

91
Make sure that you add international calling codes before the phone number to avoid unnecessary
charges caused by phone calls or messages to other countries or regions.
Figure 5-57 Mobile setting page
● Message Send: When alarms are triggered, the phone number added will receive message.
● Message Activation: You can enable 4G through message outside the period you set to use 4G.
You need to send "ON" or "OFF" to phone number of the SIM card in the Device. "ON" indicates
enabling, and "OFF" indicates disabling.
● Phone Activation: You can enable 4G through phone calls outside the period you set to use 4G.
You need to call the phone number of the SIM card in the Device. If the call gets through, it means
4G has been enabled.
● Make sure that your SIM card supports making phone calls and sending messages, and it can be
used normally.
● Make sure that you use activation function outside the time range you set; otherwise it does not
work.
Step 1 Select the checkbox of the service you need to enable. You can select one or more services.
Step 2 Enter the phone number and click to add it.
Step 3 Click Save.
Step 4 Select the Message Link checkbox on the page of the event for which you want to receive
message.
Take Face Detection for example. Click Setting > Event > Face Detection, and then select
the Message Link checkbox.