User's Manual

● If the current time is in the period you set, 4G network connection will be enabled. The IP

address of the SIM card will be displayed in IP Address. And you can access the device

through 4G after finishing the rest steps.

● If the current time is not in the period you set, 4G network connection will not be

enabled. Only the corresponding Wireless Signal is displayed on the page. And you

cannot access the device through 4G.

Figure 5-56 Period setting

Step 4 Set the interval to enable 4G through message or phone call if you want to use 4G outside

the period set in Step3.

The value range is 0–7200 s and it is 30 s by default. If the interval is 30 s, after activating 4G,

you can use it for 30 s. After 30 s, you need to activate 4G again. If you set the interval to 0 s,

you can use 4G without disconnection and you do not need to activate it again. For the

method to activate 4G through message or phone call, see "5.2.14.2 Mobile Setting".

Step 5 Click Save.

5.2.14.2 Mobile Setting

You can add the phone number to receive alarms. You also can add phone number used to activate

4G through message or phone call if you want to use 4G outside the period set in Step3 of "5.2.14.1

Dialing Setting".