User's Manual

User’s Manual
112
For parameters configuration, see "5.5.1.1 Motion Detection".
Step 3 Click
Save
.
5.5.2 Smart Motion Detection
After you set smart motion detection, when the human, non-motor vehicles and motor vehicles
appear and move fast enough to reach the preset sensitivity value, the alarm linkage actions
will be performed. The function can help you to avoid the alarms triggered by natural
environment change.
● The function depends on the result of motion detection, and all other parameters (except
sensitivity) of motion detection function are used, including arming period, area settings,
and linkage configurations. If no motion detection is triggered, smart motion detection will
not be triggered.
● If motion detection is not enabled, when smart motion detection is enabled, motion
detection will also be enabled. If both functions are enabled, when motion detection is
disabled, smart motion detection will also be disabled.
● When smart motion detection is triggered and recording is linked, back-end devices can
filter recording with human or vehicles through smart search function. For details, see the
corresponding user’s manual.
Prerequisites
● Select
Setting
>
Event
>
Video Detection
>
Motion Detection
, and then enable the
motion detection function.
● Set the arming period and detection area. The sensitivity of each region is larger than 0,
and the threshold is not equal to 100.
Procedure
1. Select
Setting
>
Event
>
Smart Motion Detection
.
Figure 5-86 Smart motion detection
2. Select the
Enable
check box to enable
Smart Motion Detection
.