User's Manual

User’s Manual
111
Figure 5-84 Video tamper settings
Step 2 Select the
Enable
check box, and then configure video tamper parameters.
For parameters configuration, see "5.5.1.1 Motion Detection".
Step 3 Click
Save
.
5.5.1.3 Scene Changing
Alarms will be triggered if there is scene changing.
Step 1 Select
Setting
>
Event
>
Video Detection
>
Scene Changing
.
Figure 5-85 Scene changing settings
Step 2 Select the
Enable
check box, and then configure scene changing parameters.