User's Manual

User’s Manual
174
● If HTTPS is enabled, you cannot access the Device through HTTP. The system
will switch to HTTPS if you access the Device through HTTP.
● The deletion of created and installed certificates cannot be restored. Think twice
before deleting them.
5.7.3.4 Firewall
Set a firewall for the Device to prevent network attacks after the Device is connected to the
network.
Step 1 Select
Setting
>
System
>
Safety
>
Firewall
.
Figure 5-169 Firewall
Step 2 Select the type of network attack that the firewall resists. You can select
Network
Access
,
PING Prohibited
, or
Prevent Semijoin
.
Step 3 Select
Enable
to enable
Firewall
ifunction.
Step 4 Click
Save
.
5.7.4 Peripheral
The peripheral functions might vary with different models.
Step 1 Select
Setting
>
System
>
Peripheral
>
Wiper
.
Figure 5-170 Wiper settings
Step 2 Configure wiper parameters.