User's Manual
User’s Manual
167
Table 5-52 Description of system service parameter
Function
Description
SSH
You can enable SSH authentication to perform safety
management. The function is disabled by default.
It is recommended to disable SSH. If this function is enabled,
there might be security risks.
Multicast/Broadcast
Search
Enable this function, and when multiple users are viewing the
monitoring screen simultaneously through network, they can find
the Device through multicast/broadcast protocol.
It is recommended to disable the multicast/broadcast search
function. If this function is enabled, there might be security risks.
Password Reset
You can enable
Password Reset
to perform security
management. The function is enabled by default.
If the function is disabled, you can only reset the password after
restoring the Device to factory defaults through pressing the Reset
button on the device.
CGI Service
You can access the Device through this protocol. The function is
enabled by default.
It is recommended to disable the function. If this function is
enabled, there might be security risks.
Onvif Service
You can access the Device through this protocol. The function is
enabled by default.
It is recommended to disable the function. If this function is
enabled, there might be security risks.
Audio and Video
Transmission
Encryption
Enable this function to encrypt the stream transmitted through the
private protocol.
● Make sure that the matched devices or software support video
decryption function.
● It is recommended to enable the function. If the function is
disabled, there might be risk of data leakage.
Mobile Push
Push the alarm snapshot triggered by the Device to the mobile
phone. The function is enabled by default.
It is recommended to disable the function. If this function is
enabled, there might be security risks.
Private Protocol
Authentication Mode
You can select
Security Mode
and
Compatible Mode
. Security
mode is recommended. If you select compatibility mode, there
might be security risks.
Step 3 Click
Save
.