User's Manual

User’s Manual
109
period to enable it.
◇
Select the day of week (
Sunday
is selected by default; If
All
is selected, the
setting is applied to the whole week. You can also select the check box
next to the day to set it separately).
3. After completing the settings, click
Save
.
You will return to the
Motion Detection
page.
● Set the area.
Click
Setting
, and the
Area
page is displayed. Refer to Table 5-25 and Table 5-
26 for parameters description. Each color represents a certain region, and you
can set different motion detection regions for each area. The detection region can
be irregular and discontinuous.
Figure 5-83 Area setting
Table 5-25 Description of area setting parameter
Parameter
Description
Name
The default names are Region1, Region2, Region3 and Region4,
and the names can be customized.
Sensitivity
Sensitivity to brightness change. The higher the sensitivity is, the
easier the motion detection event will occur.
You can set different sensitivities for each region, with values
ranging from 0 to 100, and 30 to 70 is recommended.
Threshold
Detect the relation between the object and the region. The smaller
the threshold is, the easier the motion detection will occur.
Set different thresholds for each region, with values ranging from
0 to 100, and 1 to 10 is recommended.
Waveform graph
The red line indicates that motion detection is triggered, and the
green line indicates that it is not triggered.
Remove All
Remove all detection regions.
Delete
Delete the detection region of the selected color block.