User's Manual

User’s Manual
158
5.7.1.2 Date & Time
Step 1 Select
Setting
>
System
>
General
>
Date&Time
.
Figure 5-146 Date & time
Step 2 Configure date &time parameters.
Table 5-50 Description of date & time parameter
Parameter
Description
Date Format
Select the date format. Three formats are available:
YYYY-MM-
DD
,
MM-DD-YYYY
and
DD-MM-YYYY
.
Time Format
Select the time format. Two formats are available:
24-Hour
and
12-Hour
.
Time Zone
Set the local time zone.
Current Time
The current time of the Device.
DST
Set the
Start Time
and
End Time
of DST in the
Date
format or
Week
format.
NTP
Select the
NTP
check box to enable the network time sync
function.
Server
Set the address of the time server.
Set the network timing function of NTP server, and the Device time
will be synchronized with the server time.
Port
Set the port number of the time server.
Interval
Set the synchronization interval of the Device and the time server.