User's Manual
User’s Manual
155
Dual SD cards are supported by some devices. For such devices, the SD card first inserted is
called Local Disk 1, and the SD card inserted later is called Local Disk 2.
● If no recordings in both cards, the recording will be saved to Local Disk 1, and then saved
to Local Disk 2 when Disk 1 is full.
● If there are recordings in both cards, the recording will be saved to the card with the latest
recordings, and then saved to the other card when this card is full.
Step 1 Select
Setting
>
Storage
>
Destination
>
Local
.
Figure 5-142 Local storage
Step 2 Select the SD card to be set, and then perform the following operations as needed.
● Click
Read Only
to set the SD card to be read only.
● Click
Read & Write
to set the SD card to be read and write.
● Click
Hot Swap
to remove or insert the SD card when the Camera is running.
● Click
Format
to format the SD card.
After formatting the SD card, all data on it will be cleared. Be cautious.
5.6.3.4 NAS
This function can be enabled only when NAS is selected as a destination path. Select NAS to
store files on the NAS server.
Step 1 Select
Setting
>
Storage
>
Destination
>
NAS
.
Figure 5-143 NAS settings
Step 2 Configure NAS setting parameters.