User's Manual

User’s Manual

153

5.6.3 Destination

5.6.3.1 Path

Configure the storage path of recordings and snapshots of the Device, and select local SD

card, FTP and NAS for storage. Store recordings and snapshots according to the event type,

respectively corresponding to

General

Motion

and

Alarm

in the schedule, and then select

the corresponding type of recordings or snapshots for storage.

Step 1 Select

Setting

Storage

Destination

Path

Figure 5-140 Path settings

Step 2 Select the corresponding event type and storage method.

Table 5-45 Description of path parameter

Parameter

Description

Event Type

Select

Scheduled

Motion Detection

Alarm

Local

Save recordings or snapshots to the SD card.

FTP

Save recordings or snapshots to the FTP server.

NAS

Save recordings or snapshots to the NAS server.

Step 3 Click

Save

5.6.3.2 FTP

FTP function can be enabled only when it is selected as a destination path. When the network

is disconnected or does not work, you can save recordings and snapshots to the SD card by

using

Emergency (Local)

function.

Step 1 Select

Setting

Storage

Destination

FTP