User's Manual

User’s Manual
137
Figure 5-116 People counting settings
Step 2 Select the presets to be configured.
Step 3 Click
Draw Rule
, and you can draw rules on the monitoring screen. For parameter
description, see Table 5-28.
Click
Clear
to the right of
Draw Rule
, and you can clear all drawn rules.
Step 4 Configure people counting parameter.
Table 5-39 Description of people counting parameter
Parameter
Description
OSD
Display the number of people displayed in the area in real time.
Click
Clear
, and the current number will be zero.
Enter No.
Set the
Enter No.
, and when the number of people entering
reaches the set value, an alarm will be triggered.
Leave No.
Set the
Leave No.
, and when the number of people leaving
reaches the set value, an alarm will be triggered.
Stranded No.
Set the
Stranded No.
, and when the number of people staying
reaches the set value, an alarm will be triggered.
For other parameters, see "5.5.5.1 Tripwire".
Step 5 Click
Save
.