User's Manual

User’s Manual
136
Table 5-38 Description of alarm linkage parameter
Parameter
Description
Face Database
Select the face database to be configured with alarm linkage.
Alarm Rule
Select the alarm rule as needed.
Relay-out
Select the
Relay-out
check box, and when an alarm is triggered, the
system interacts with the linked alarm devices.
Alarm Delay
The alarm will continue for an extended period of time. The value
range is 1–300 s.
Step 3 Click
Save
.
5.5.8 People Counting
You can use this function to count the number of people in the area and generate reports.
Before using this function, you need to enable
People Counting
in
Smart Plan
.
The people counting data will be overwritten if the disk is full. Back up the data in time as
needed.
This function is available on select models.
5.5.8.1 People Counting Settings
With the function, the system can count the number of people appearing in the monitoring
screen within a certain period.
Step 1 Select
Setting
>
Event
>
People Counting
>
People Counting
.