User's Manual

User’s Manual
128
Parameter
Description
Face Enhancement
Select
Face Enhancement
to preferably guarantee clear faces with
low stream.
Record
Select
Record
, and the system records video when alarms are
triggered.
To enable video recording, you need to make sure that:
● The motion detection recording is enabled. For details, see
"5.6.1.1 Record".
● The auto recording is enabled. For details, see "5.6.4 Record
Control".
Record Delay
The video recording will not stop until the record delay time you set
has passed.
Send Email
Select
Send Email
, and when alarms are triggered, the system
sends email to the specified mailbox. For the email settings, see
"5.2.5 SMTP (Email)".
Snapshot
Select
Snapshot
, and the system takes snapshot when alarms are
triggered.
● Enable the motion detection snapshot first. For details, see
"5.6.1.1 Record".
● For searching and setting snapshot storage path, see "5.1.2.5
Path".
Snap Face Image
Set the snapshot scope, including
Face
and
One-inch photo
.
Attribute
Select the
Attribute
check box, click , and then you can set
the human attributes during face detection.
Step 4 Click
Save
.
5.5.7.2 Face Database Config
After you successfully configure the face database, the detected faces can be compared with
the information in the face database. Configuring a face database includes creating a face
database, adding face images, and face modeling.
5.5.7.2.1 Adding Face Database
Create a face database, and then register face images to add face images to the newly
created face database.
Step 1 Select
Setting
>
Event
>
Face Recognition
>
Face Database Config
.